M-25/5421 Marine Diesel Engine

Description	Part #		Description	Part #
Air Filter	302181		Oil Pressure Switch	299964
Air Filter Element	301049		Panel, Standard	300680
Alternator	302280		Panel, Deluxe	300685
Ammeter	300668		Panel, Custom	300690
Belt	300805		Pump, Fresh Water	300203
Dipstick	300134		Pump, Mounting Gasket	300204
Exhaust Manifold	301014		Pump, Rebuild Kit	N/A
Exhaust Manifold Gasket (A)	299435		Pump, Sea Water (E)	302648
Filter, Lube Oil	300209		Pump Mounting Gasket (E)	302678
Filter, Fuel Oil	298854		Pump, Impeller (E)	302875
Filter, Electric Lift	300128		Pump, Repair Kit	N/A
Gasket, Head	300141		Pump, Seal (E)	302885
Gasket, Oil Pan	300132		Pump Conversion Kit
Gasket Set, Upper	256836		(includes pump)	302837
Gasket Set, Complete	256808		Pump Conversion Kit
Glow Plug	299685		(excludes pump)	302838
Harness, 5 FT. EXT.	300708		PTO Pulley Kit (F)	302159
Harness, 10 FT. EXT.	300675		Pump, Fuel Lift	301385
Harness, Engine	298586		Shim, Cylinder Head	300142
Heat Exchanger (B)	299049		Spare Parts Kit A	256912
Heat Exchanger End Cap (C)	299838		Spare Parts Kit B	256802
Heat Exchanger Gasket	299838		Starter	299512
lnjector (D)	Note (D)		Starter Solenoid (G)	Note (G)
Injection Pump	300191		Tachometer	300684
Injection Hardware Kit	N/A		Tachometer with Hour Meter	300687
Injector Nozzle	301514		Tank, Coolant Recovery	300238
Injector Return Line	302923		Thermostat Element(H)	301358
isolators	300514		Thermostat Element Gasket	N/A
Ignition Switch	300671		Thermostat MTG Gasket	300237
Manuals, Operators	200157		Valve Cover Gasket	300158
Manuals, Parts	200142		Water Temp Meter	300670
Manuals, Technical	200151		Water Temp Sender	299066
Oil Drain Washer Kit	301431		Water Injected Elbow	N/A
Oil Pump	299405		Zinc(I)	301069
NOTES:
(A) Qty (3) exhaust manifold gaskets required per engine.
(B) 299049 is 2" diameter X 16" long
(C) 299838 consists of end cap, gasket, & bolt
(D) Qty (1) 298787 & Qty (2) 298788 injectors are used per engine.
(E) New style Sherwood pump - no end cover plate
Old style Sherwood Pump has six (6) end cover screws
Oberdorfer Pump has four (4) end cover screws
(F) This is pulley only. Also required are Qty (3) capscrews P/N 302046.
(G) P/N 300538 with studs or P/N 299771 with screws.
(H) Thermostat is 160 degree
(I) 301069 zinc is used on 2" diameter heat exchangers.