M-35 Marine Diesel Engine

Description	Part #		Description	Part #
Air Filter	301138		Oil Pressure Switch	299964
Air Filter Element	301049		Panel, Standard	300680
Alternator	302280		Panel, Deluxe	300685
Ammeter	300668		Panel, Custom	300690
Belt	300817		Pump, Fresh Water	302503
Dipstick	302432		Pump, Mounting Gasket	300204
Exhaust Manifold	302092		Pump, Rebuild Kit	N/A
Exhaust Manifold Gasket	302506		Pump, Sea Water (C)	302648
Filter, Lube Oil	300209		Pump Mounting Gasket (C)	302678
Filter, Fuel Oil	298854		Pump, Impeller (C)	302875
Filter, Electric Lift	300128		Pump, Repair Kit	N/A
Gasket, Head	302442		Pump, Seal	302885
Gasket, Oil Pan	302431		Pump Conversion Kit
Gasket Set, Upper	256931		(Includes pump)	302837
Gasket Set, Complete	256932		Pump Conversion Kit
Glow Plug	301754		(Excludes pump)	302838
Harness, 5 FT. EXT.	300708		PTO Pulley Kit  (D)	302159
Harness, 10 FT. EXT.	300675		Pump, Fuel Lift	301385
Harness, Engine	298586		Shim, Cylinder Head	302443
Heat Exchanger (A)	302253		Spare Parts Kit A	256913
Heat Exchanger End Cap (B)	301457		Spare Parts Kit B	256902
Heat Exchanger Gasket	301457		Starter	302474
Injector	302475		Starter Solenoid	N/A
Injection Pump	302494		Tachometer	300684
Injection Hardware Kit	N/A		Tachometer with Hour Meter	300687
Injector Nozzle	301514		Tank, Coolant Recovery	300238
Injector Return Line	Note (F)		Thermotat Element	301358
Isolators	300514		Thermostat Element Gasket	N/A
Ignition Switch	300671		Thermostat MTG Gasket	300237
Manuals, Operators	200157		Valve Cover Gasket	302450
Manuals, Parts	200145		Water Temp Meter	300670
Manuals, Technical	200155		Water Temp Sender	299066
Oil Drain Washer Kit	301431		Water Injected Elbow	N/A
Oil Pump	299405		Zinc (E)	301068
NOTES:
(A) 302253 exchanger - 3" diameter; sits on bracket & mounted with clamps.
302631 exchanger is latest style - 3" diameter; clamps are attached to exchanger for mounting
(B) P/N 301457 consists of gasket, end cap, & bolt.
(C) New style Sherwood pump - does not have end cover plate.
Old style Sherwood Pump has six (6) end cover screws
Johnson Pump has four (6) end cover screws
(D) This is pulley only. Also required are (3) 302046 capscrews.
(E) 301068 for 3" diameter exchanger - 3/8 NPT X 1-1/2 X 1/2 diameter.
(F) Consult Parts Manual For Return Line Components.