M2-12 Marine Diesel Engine

Description	Part #		Description	Part #
Air Filter	301926		Oil Pressure Switch	299964
Air Filter Element	301049		Panel, Standard	300680
Alternator	302280		Panel, Deluxe	300685
Ammeter	300668		Panel, Custom	300690
Belt	302084		Pump, Fresh Water	301336
Dipstick	301212		Pump, Mounting Gasket	301340
Exhaust Manifold	300802		Pump, Rebuild Kit	N/A
Exhaust Manifold Gasket (A)	301245		Pump, Sea Water (E	302648
Filter, Lube Oil	300209		Pump Mounting Gasket (E)	302678
Filter, Fuel Oil	298854		Pump, Impeller (E)	302875
Filter, Electric Lift	300128		Pump, Repair Kit	N/A
Gasket, Head	302791		Pump, Seal (E)	302885
Gasket, Oil Pan	301209		Pump Conversion Kit
Gasket Set, Upper	256840		(includes pump)	302835
Gasket Set, Complete	256841		Pump Conversion Kit.
Glow Plug	301754		(excludes pump)	302838
Harness, 5 FT. EXT.	300708		PTO Pulley Kit	303068
Harness, 10 FT. EXT.	300675		Pump, Fuel Lift	301385
Harness, Engine	296586		Shim, Cylinder Heed	N/A
Heat Exchanger (B)	298633		Spare Parts Kit A	256910
Heat Exchanger End Cap	299838		Spare Parts Kit B	256829
Heat Exchanger Gasket (C)	299838		Starter	301295
Injector	302735		Starter Solenoid	301933
Injection Pump	302795		Tachometer	300684
Injection Hardware Kit	N/A		Tachometer with Hour Meter	300687
Injector Nozzle	N/A		Tank, Coolant Recovery	300238
Injector Return Line (D)	Note		Thermostat Element	301358
Isolators	300974		Thermostat Element Gasket	N/A
Ignition Switch	300671		Thermostat MTG Gasket	300237
Manuals, Operators	200157		Valve Cover Gasket	301239
Manuals, Parts	200137		Water Temp Meter	300670
Manuals, Technical	200155		Water Temp Sender	299066
Oil Drain Washer Kit	301431		Water Injected Elbow	N/A
Oil Pump	301203		Zinc(F)	301069
NOTES:
(A)Qty. (2) exhaust manifold gaskets required per engine.
(B) The heat exchanger is 2 inches in diameter
(C) Heat exchanger end cap, gasket, and bolt are P/N 299838
(D) Injector return line consists of: (1) 299831,(1) 301298,(1) 301299
(E) New style Sherwood Pump - Does not have an end cover plate
Old style Sherwood Pump has six (6) end cover screws
Oberdorfer Pump has four (4) end cover screws
(F) Zinc size is 1/8 NPT X 1-7/8" long X 3/16 diameter